Questions & Answers for: spill

Question about 2500 PSI Pressure Washer

2 Answers

karcher 520m spill valve jammed when you turn on at the mains the pumps starts then stops, press the trigger and only mains pressure flows through. after stripping down the spill valve is jammed in ...

Ad

Question about 2500 PSI Pressure Washer

1 Answer

...be an internal leak through a diaphragm or valve? Dear Sir(s), The majority of power washers have a spill valve or sometimes called a Control Valve. This spill valve will contract when the gun is ...

Ad

Question about 2500 PSI Pressure Washer

1 Answer

...when trigger released does not activate Dear rbaker2, Auto shut off is carried out by means of a spill valve or also know as a control valve. When the gun is closed, pressure is built within the ...

Question about K2.26 Electric Power Washer

1 Answer

trigger is shut, pressure builds up in machine and this activates a control-valve or often called a Spill Valve. This Spill Valve compresses with the built up pressure and switches off a micro-switch.

...identified several times however I am unable to identify what specific sub-assembly contains the SPILL VALVE. Could someone provide me with more details? Dear frank_perra, The spill valve is

Question about K2.26 Electric Power Washer

1 Answer

what do i use for a roundup wedd killer spill? what do i use for a roundup weed killer spill? From MSDS: SMALL SPILL: Soak up spilled material with paper towels and discard in trash. LARGE SPILL: ...

Question about PSI Electric Pressure Washer

1 Answer

...on wand is released. When the trigger is released, pressure builds up and this acts on a valve (spill valve or pressure control valve). When this pressure is big enough it will push the spill ...

Question about K2.26 Electric Power Washer

1 Answer

...a faulty, blocked NOZZEL. NOrmally the machine stops when gun is released because there is a valve (Spill Valve) that actuates a electrical micro switch. This in turn closes off te electric ...

Question about K2.26 Electric Power Washer

1 Answer

...washer stops when the gun is closed. This happens because pressure is exerted on a control valve (Spill Valve)...which in turn touches a micro switch and cuts electricity. Now most probably your ...

Question about Repair Pcb / Module Dw1612 Dwi612c

1 Answer

How do the assumptions fit in with the Spill Cleanup Policy? For purposes of the Spill Cleanup Policy only, where a spill of untested mineral oil occurs, the oil is presumed to contain >50 but ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...