Questions & Answers for: Chrysler Voyager speedo sensor

speedo not operating. Fault code (P1698 no canbus message) Changed two speed sensors on side of transmission, all fuses ok and re soldered connection behind dash or dials (a forum suggested this could

...speedo works until you go over a bump it stop then starts again when you go over another bump You will need to check the connector at the Vehicle Speed Sensor,either the connector has a problem or ...

...take please 3.3l 97 I have 3.3 the gearbox stay in second gaer and doesnt want to change and the speedo also dont work it select reverse neutral park drive but dont shift ...

...doesnt work my speedo is stuck on zero i want to check the fuse but i know where the fuse box is under dash but which fuse if for speedo? is there one? your speedo run off of a sensor on the ...

...sensor that makes the speedo work It's going to depend on WHO does the work and labor cost's. The sensor should be in the transmission(speed sensor) and it may be reached by removing the transmission ...

...sensor on on a voyager 2.5 td 1999 the speedo has stopped working rev counter is ok all other gauges seem to be fine , have also ran the test vias the trip/reset pins all needle do there thing ...

speedo showing double the speed that i really am at Vehicle speed sensor in transmission is probably at fault.

...sensor). If i was the dealer, that would be the first thing i would check. It tells the tranny what speed the vehicle is going to ensure proper shifts, tells the speedo what speed you are going, and ...