Questions & Answers for: how to troubleshoot speed transducer

speed transducer, or least likely, in the DSM25 sounder module. Both the log and the trip functiions are read from the paddle-wheel sensor of the connected DSM25 sounder module and transducer. 1. Make

...transducer mount with the chord, a speed thing with a wheel, and a smaller looking transducer. My question is ??? the power chord was cut and I noticed four color wires in it, black for -, red for +, ...

transducer at any speed other than low idle. The speed and water temp work so I know the transducer is communicating. There is probably interference occuring, but I have moved it several times with no

...down further as it is lifted by the boat at higher speeds, or is getting caught in the turbulence of surface water created at higher speed. Lower the transducer a half inch at a time and

transducer with the speed on it? or will my gps give me the speed my boat is traveling The unit will give you speed over ground directly form GPS. there is a difference between Speed Over Ground (SOG)

...transducer lower. When at speed, the hull of the ship raises up out of the water and hence your transducer is probably not deep enough at these times to give a proper reading. This is due to ...

speed Transducer loses bottom at any type of speed greater than trolling. Worked fine last year with all the same setttings. All I can think of is , maybe the battery is low. The boat just came out of

speed transducer needs to be replaced. I have a Beneteua 351 which is 16 years old. I have cleaned the transducer several times and then reinstalled. It will work for a couple of minutes and then stop

...speed i tend to lose sight of the bottom it becomes very broken. Also the depth reading takes a while to record depth. What you are experiencing sounds like air bubbles crossing the face of the ...

...transducer for my HDS and also a speed wheel .my question is can i remove the speed wheel and put my side scanner next to the HDS transducer or should i locate the LSS transducer somewhere else and ...