Questions & Answers for: special torx

Where to get a special torx screw driver, my Rowenta DM866 iron requires a special "hollow" torx screwdriver to open it up for repair of the power cord. you can get them at most auto parts shops

caliper pins for brakes on 2003 chevy t50 is to small t55 to big is there a special torx needed to remove the caliper pins? they are not hex either. yes torx.

...Torx', which all require special tools. They do it to prevent people from opening them up. But you can buy the tools, and for triangular screws I ground an old screwdriver down to match the shape! ...

...special tool just for that, but i've used a regular torx socket with a removable bit. Then used a closed end wrench on the bit and double wrenched it for extra leverage as that bolt is on there

...or torx and what size It will most likely be a fairly large torx, and in some cases,you need to buy a special seat belt torx. I don't have an explorer close by, to check my special bit on, for

...torx and where do i get the tool unfortunately you have to order this special tool and it doesn't go by size but rather by name. It's a 2-stroke carb adjustment tool. find a small a small engine shop ...

...Torx. It could be any of many including a thing that looks like a philips but only three slots instead of 4 or a 'clutch' or it could be a 'one way' or other special bit.. The person ...

...special size that comes as a socket type from the parts store. I believe is is a TORX 45. But, usually you can fit and allen wrench into the torx hole to remove them. I have used 5/16",3/8",8mm and ...

what tool is needed to remove the dimmer switch what is the special star screwdriver needed to remove the dimmer switch Torx bit. Or Torx screw driver

...special tool. Another said it might be a tool from an industrial supply store or specialized electrical store. Any ideas? Sounds like a Torx Screwdriver ...