Questions & Answers for: JVC speaker covers

speakers 3 of the five speakers are not working is this a big problem or something I can try at home and check by removing the back cover. (some kind of test) befor go deeper check your cable first ...

...3-4 times Any help would be appreciated. Lankford well if your getting sound out of your surround speakers then the sub is busted, if your getting no sound at all then your speaker input's are ...

TH-M606 MY SOUROUND SYSTEM IS WORKING AND AND THE SPEAKERS ARE WORKING FINE. THE SPEAKERS FEED OUT OF THE WOOFER BOX. THE LED ON THE WOOFER BOX IS LIT. THERE IS NO BASS REGARDLESS WHAT VOLUME ITS ON. ...

...to come out. JVC HXD7 AUDIO SYSTEM, PROTECT CODE COMES ON check the connection of the wire from the speaker to the audio stage,and also check the speakers if it is good. If there is a good connection ...

speakers cut out ill be listening to music then the speakers will cut out. if i put pressure on the top cover the speakers will come back, almost as though there is a connection problem. i took the ...

...terminal) Purple / Black stripe - Rear right speaker (negative terminal) Purple = Rear right speaker (positive terminal) That covers all off the cables that you should have with the car

iI HAVE A JVC I ART PRO TV AND ITS SEEING DOBLE this is a convergence ic problem , u need to replace the convergence ic take the front speaker grill off and the cover for the picture tube , stk392-110

...the right side of my headphone, and i love my music!! If you take off the covering to reveal the speaker you can solder the connection back onto the left side of the headphones and that will fix

...rightish of the unit. If protect shows and you can get nothing from the unit, then it will be this? Speaker cable or connector short. Check to be sure the terminals of the speaker leads are covered ...

...or WP74 series that has a convergence shutdown which will usually cause the thumping through the speakers. Unplug the convergence power board and see if the set will power up. Do not remove the ...