Questions & Answers for: Chevrolet TrailBlazer spark plug

Question about 2002 TrailBlazer

1 Answer

...spark plug cylinder. Just remove the screw (I hope you removed the resonator first). The 2 plugs back towards the firewall are a little tougher to reach, just ensure when you put the new plugs in, ...

Ad

Question about 2003 TrailBlazer

2 Answers

...spark plug and leave connected to the distributor or coil pack (agian, whichever is installed) - do this for each spark plug. TIP: start with the two rear plugs as they are the most difficult to get ...

Ad

Question about 2006 Trailblazer

2 Answers

Spark Plug Gap settings what are the gap settings for 2006 trailblazer 4.2 liter 6 cylinder? ACDELCO Part # 41103 SPARK PLUG .043 GAP there should be a decal under the hood of the truck telling you ...

Question about 2002 TrailBlazer

2 Answers

...spark plug wires from it out to each spark plug but each wire as u pull them. dont take all off at once . or u might not know how to hook them all back the right way. to altec35 reguarding your ...

...SPARK PLUG SOCKET - 3/8 RATCHET WRENCH. NEED SPARK PLUG GAUGE AND A TORQUE WRENCH.YOU CAN GET BY WITH OUT ONE LONG AS YOU DONT OVER TIGHTEN PLUGS AND STRIP OUT ALUMINUM THREADS. how do you take ...

Question about 2005 TrailBlazer

2 Answers

...spark plug insert will help keep the plug in the socket as you pull it out. -david SPARK PLUGS UNDER THE ENGINE COVER ON TOP IN THE CYLINDER HEAD.SPARK PLUGS COILS AND BOOT ON TOP OF SPARK PLUGS.YOU ...

where do i find spark plugs and wires on chevolet trailblazer 2002 The spark plugs are located normally near the value cover where you put in the oil. The wires run from the spark plugs. If your ...

Question about 2002 TrailBlazer

4 Answers

...spark plug wire and follow it down to motor, pull plug wire off the spark plug with a twist and get a 5/8 spark plug socket and possibly a 3/8 4" extension slide socket over the spark plug and attach ...

Question about 2002 TrailBlazer

2 Answers

...HAVE TO REMOVE 6 IGNITION COILS. YOU HAVE ONE COIL PER SPARK PLUG.REMOVE COIL BOLTS THEN REMOVE COILS OFF TOP OF SPARK PLUGS.YOU NEED A LONG EXTENSION AND LONG SPARK PLUG SOCKET TO REMOVE SPARK

...the name of the part a spark plug sits in? what's the name of the part a spark plug sits in? The spark plug is screwed into the cylinder head. Spark plug is #5 in picture below, coil pack is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...