...Spanner for removing 3 studs with T40 Torx ends (method 2 only) 18mm (or 3/8W, 7/16BS) Crowfoot wrench for removing union nut on HP pipe power steering pump. (method 1 only) 10mm ring or combination ...
...to replace motor now - getting fed-up. also, what size are the wheel nuts. want to replace wheel spanner, stripped on first use, with socket. It may just be the wires are not making contact. Thats ...
...ford focus? lift bonnet and top front left hand side ,very easy to change and the belt adjuster tensioner is at the back with a 17mm spanner size nut just pull it towards you to release the ...
...engine then its quite simple ,just slacken and remove the fan belt by turning tensioner with a spanner clockwuase and this will release the tension so belt can be slipped off.then their is one ...
Question about 2005 Focus
...the radiator support cross member then let the rads drop down a bit then you can get a small 10mm spanner and put your arm to undo the two nuts on the back of the lock on the bonnet,i have done ...
Usually answered in minutes!
3,749 Questions
2,612 Questions
2,055 Questions
1,226 Questions
897 Questions