Questions & Answers for: Ford spanner nut

Question about 1996 Escort 4 Door

1 Answer

spanner and put the ring side over the nut then use a hammer to tap the nut loose,if that does not work take a chisel and put it on the side of the nut and then tap with a hefty hammer until loose you

Ad

Question about 1983 Fairmont

2 Answers

spanner on the nut just behind the fan with the spanner pointing straight up. then jar the spanner with the hammer towards the battery,(opposite direction to a normal bolt) once jared loose you should

Ad

Question about 1994 Explorer Limited

1 Answer

How do you remove the spanner nut on a 1994 ford explorer 4x4 front brake rotor. I need to replace my rotors. Thanks. There is a small key on the inside of the nut that holds it in place.

...Spanner for removing 3 studs with T40 Torx ends (method 2 only) 18mm (or 3/8W, 7/16BS) Crowfoot wrench for removing union nut on HP pipe power steering pump. (method 1 only) 10mm ring or combination ...

...spanner nut there will be a large washer behind that with a small tab holes,that shim will pull out ,next remove the inner spanner nut(the same as the first one).This inner nut will have a small tab ...

Question about 1993 F150 SuperCab

1 Answer

...spanner nut socket, however it can be achieved using a screw driver and a hammer. just do hit it to hard. 6. pull off the hub. be careful because the internal bearing will come out. keep them off the ...

how do you set the torque for the front axle hub nut? simple answer is to do the nut up as tight as you can with a standard spanner,then back off 1/8th of a turn,until the wheel spins free.....

Question about 2002 Super Duty F 450

1 Answer

...parts or Autozone. Or you should purchase on from the local tool distributor. This spanner nut is used on the front and the rear wheels. Price is anywhere from $45 -$90 fora good socket

Question about 1995 F250

1 Answer

how do I loosen a spanner nut so I am changing wheel bearing on my 1995 ford f250 xlt 4x4 everything is going smooth but I cant get the spanner nut to break loose it takes a special socket to get off.

...spanner size) nut and disconnect the solenoid wire undo and remove the 13mm (spanner size) nut and disconnect the main starter lead and the alternator wiring undo and remove the 13mm (spanner size) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...