Questions & Answers for: spanner nut

Ad

Question about 9553NB 4" Angle Grinder

1 Answer

...nut over the disk. the other spanner has 2 nodules which fit in the holes on the nut under disk. whilst holding the disk stationary with the thin spanner, rotate the noduled spanner in the oposite ...

Ad

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

Spanner nut removel I can't get the spanner nut off the basket. How do I break it free.? Hi, The proper tool is P# TB123A. You can also use a coal chissle and a hammer. Be careful that part of the ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

...nut turn and in the absence of spanner wrench what could be used in it's place It turns anti clock wise and you can use a box spanner or a socket set or adjustable spanner. Do not use anything other ...

Question about 24032\24036 Top Load Washer

1 Answer

Spanner Nut / Whirlpool top-loader washer. You don't have to buy a special spanner wrench ($20) to remove the spanner nut. I've used a short 10" pipe wrench (about $9.00 also good for cracking walnuts

Question about 2006 Galant

1 Answer

...of BOX spanners or ring spanners with the correct size to wrench free the nuts. If jammed use a double end spanner with a hammer but with caution , not to damage the nut or allow it to be rounded

Question about 2006 Galant

1 Answer

...spanner not from the shaft on my kenmore 110.9228110 Right hand threaded nut holds tub in place is direct drive, top loading washing machines. To remove the spanner nut you will need a spanner ...

Question about LTE5243D Top Load Stacked Washer/Dryer

1 Answer

...nut spanner from a new Whirlpool top loader washer (is it a right hand or left hand threading) The spanner nut is standard thread to loosen/remove it turn it to the LEFT,you do need a spanner wrench ...

Question about LTE5243D Top Load Stacked Washer/Dryer

1 Answer

...tight. Here you need a flare nut wrench, which is a ring spanner with a slot to allow it go around the fuel line. Using an open end spanner or adjustable spanner may round off the nut if it is

Question about LTE5243D Top Load Stacked Washer/Dryer

1 Answer

...nut sizes on each spanner, two at each end. If you can borrow a head spanner so much the better. These spanners are used to tighten the large nuts that hold the handlebars (headset) to the frame of ...

Question about LTE5243D Top Load Stacked Washer/Dryer

1 Answer

hoe does the locking nut come off Hold the inner nut with a spanner. With a second spanner undo the outer nut in an anticlockwise direction. If the inner nut is not held the two nuts may turn together

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Saws Experts

Tom Chichester

Level 3 Expert

53179 Answers

ray gallant
ray gallant

Level 3 Expert

63744 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2009 Answers

Are you a Saws Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...