Questions & Answers for: Tascam sound recorder Music

...SEND", AT THE TOP WHERE IT SAYS LOOP POSITION LEVEL.. TURN YOUR KNOB UNTIL YOU HEAR THE REVERB SOUND..(THE BIG

...the panel will flash in time with the tempo. What do I need to do get it to work? (I know there is sound coming out of the unit as I am playing a keyboard through it which I can hear). Thanks for ...

...bought a new Tascam 2488 portastudio. Following directions to record first song, but I can't get sound through either headphones or monitor outputs. I know I have a signal because I can overdrive ...

conn organ powering on but not playing any sound Check for a problem with the expression pedal. Some have a light and photo resistor and lamp burns out.

Hi, why is it when I have finished mastering a song and record it on to the cd burner on my tascam 2488 mk2 it playsback so much lower that it sounds out of my monitors? This is a common problem and I

...is balanced. Which jack plugs do I use? Mono or stereo? I have tried mono and all I get is **** sound and feedback. A 1/4 inch short instrument (mono) cable between the AUX unbalanced 2488 and

...recorder I recommend contacting Tascam at this link:http://tascam.com/contact/support/ Describe your problem. As far as I can tell there were some problems with the media you could use. This article ...

...comes up with a normal screen and the LED for the hard drive says it's reading the hard drive. It sounds like the hard drive has failed... cheap test, get another and reformat the new one. They are ...

when i place an in/out on a desired riff or measure, there is always a clipping/clicking sound that will never go away when i reapet or copy and paste etc., no matter how close i trim the in/out. can ...

when i put in the blank cd i record but when played back no sound on cd.not recording A common probllem with stand-alone CD recordders is that one MUST do a "finalize" operation before the disk will ...