Questions & Answers for: sound dim led Televison & Video

...dim & flashes,DP37 & DP11 flash together.The front power light flashes.It makes power up sounds but no picture or sound. common fault on hitachi is the -26 volt supply is bad,ther should be voltage ...

...sound VERY dim led home theater worked fine and one day and the next there was no sound and the led was very very dim. it flickered back on after messing around w/it and the sound worked again. tried ...

...LED display at all. Checked connections and schematics, all OK. Any ideas. I did reinstall the old board, and it does illuminate, but still too dim. The oven is 10 years old, and this my 3rd control ...

...dim lamp (red) led goes back to full intensity. I have read the user manual and ensured that the lamp panel switch is engaged and everything else suggested. Visually the lamp looks fine but i suspect ...

...sound like expected behaviour? (The lamp replacement and temp led's have never come on whilst i have had the projector) READY light is green when the projector is ready to be switched on LAMP is dim ...

...sound dim led in my printer Samsung MJC 5700 connect to power then no sound! one time flashing power LED and dim it LED! hi, your samsung mjc 5700 printer high voltage power supply is poor so replace ...

...dim that it appears to not be illuminated. If I shut off all power to the dishwasher (turn off the breaker) and then turn it again after a short time, the LED is brightly illuminated, but then it ...

...Picture and sound are fine. Just very dim Sound like you have a bad ground at your board somewhere but if you are not familiar with electronics and high voltage please call a certified ...

...sound ok but screen very dim can barely see and flashing. Is this likely main board, t-con or led panel? What can I do to diagnose? Thanks for your help. It's not the main board, tcon board or panel, ...

...dim, dark picture. The picture is full, the sound is full, but remains too dark to watch. Do you have suggestions as to a fix? Back light inverter board? LED driver board? Thank you. Depends on the ...