Questions & Answers for: Nissan Pickup sorry na

Question about 1996 Pickup

2 Answers

diagnostic codes I went to Auto Zone for a Free Diagnostic check. They gave me Two codes: P0304, and P0180. I checked the fuses, and didn't find any bad ones. I want to have a heads up on the problem,

Ad

Question about 1996 Pickup

1 Answer

96 nissan hardbody smock check i have a 96 nissan D21 clear the check engine and drove ot for 50 miles and monitors not ready drove 400 miles and monitor still nor ready any sugestions amına ...

Ad

I NEED COMPLETE 1984 NISSAN CABURATOR, WITH FULL PUMP, THANKS. Sorry cant help you with the spares side evan here in spain cars dont normally run that long as people buy newer cars,the vehicle ...

Question about 1997 Pickup

1 Answer

...saying, sorry i Na much help on this occasion, it could be a number of things, the best way to see if it is the gasket is to clean up around the leek and keep a close eye on where it maybe cumming ...

Question about 1987 Pickup

1 Answer

water leaking into oil td27 t motor Sorry, time for a new head gasket.

I need manual, electrical and schematic diagram Sorry I have not found a place on the internet that gives this info free. You will have to buy the book.

need a vacuum diagram for 93 d21 2.4 l http://nissannut.com/projects/z24i_fuel_injection/    ask these guys im sorry ive never had or worked on one of the trucks i hope this helps.

parking lights and dash lights not working fuse is good and head lights work fine I have had the same sorts of  problems and I had to replace the ignition switch. VERY EXPENSIVE sorry

heater or A/c wont come on on my 1992 Nissan d21. replaced resistor, blower and switches. still no luck Sorry to say but try the heater core. its under the dash on the passanger side,

Question about 1987 Pickup

1 Answer

vacuumlinediagram diagram of vacuum lines to and from carburator Sorry it's not very clear

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...