Questions & Answers for: sony reciever protect

...reciever? have done everything i have read and nothing is working! the model # is-sony str-k900. thanks in advanc for any help Hi, Good enws is yout unit is not fried. Bad news is you need to get the ...

...Sony reciever-STR-DE575. When I turn it on, it flashes a message "PROTECT". I unplugged the reciever for a couple of days, hoping it would reset itself but it did not. The volume is set at 5. Is it ...

sony ht-ddw750 protect mode on don't know why i removed all components and unplugged the reciever and plugged it back in and it still flashes protect. Sorry for the bad news. It probably needs an ...

Sony DE-445 reciever flashes PROTECT have a DE-445. turn it on , works about 30-45 seconds,starts feedback noise, then goes silent and flashes PROTECT. Checked for loose screws, found nothing. Someone

Reciever on protect mode Had a power outage, recieve went on protect mode but now I don't know how to reset it. Can someone help me, please? Thank you Hold in power button until unit "clicks." Takes ...

...SONY RECIEVER SRT-DE597 6.1 CHANNEL AND I ITS ON PROTECTED MODE CAN YOU HELP ME UN PROTECTED Amp output is damaged and needs repaired. Protect mode cannot be deactivated. When amp is repaired and ...

...sony STR-DE 597 go in protect mode. how can I fix/repair this? Give me a tips. protect mode means there is a shorted components inside your reciever it's probably the out put transistors take out ...

Sony reciever str-dh810 in protection mode Stuck in protection mode disconnectedall speakers, unplugged unit, tightened all screws, used air compressor, and is still in protection More than likely a ...

...Sony Is Known for that problem, Check on your screen if a red lit warning Staying (protect) Is on.If there is, Try hiting the reciever on the sides or the top of the cover fairly hard when it is ...

sony reciever shows protect on display May be bad connections on the preamp ic's. Otherwise there is a short in the amp that needs to be repaired.