Questions & Answers for: sony receiver display shows protect Video Game Consoles & Games

...receiver and speakers. If the issue is still unresolved after completing all of the troubleshooting steps, service may be required. Created: Thu Sep 16 14:49 2004 | Last Modified: Wed Jan 11 09:02 ...

...display write protect? Does any knows what is the problem? in Sony receivers Protect display shows problem / fault in Amplifier output area. Qualified technician can repair the damage.

...family member was tring to play a CD and was pushing buttons now the display screen shows "unlock" for maybe 30 seconds. when i turn on sony receiver it will not play it just says protect on the ...

...display shows "Protect" flashing. I tried resetting the receiver and this did not work. What is the next step to fix the problem. In all likelyhood, one or more output transistors have failed. Please ...

receiver shuts off/protect shows on display. turned off then back on did not help If the unit goes into this mode immediately, it suggests that the output transistors are shorted. This is a common ...

...Sony and they wanted $200 for a repair and wouldn't offer any other suggestions. Protect will usually show up if the receiver was turned up too loud to the point where the speakers will crackle, ...

receiver lost sound. It still shows power, all the lights and displays are still on, all the connections are in place, the speakers are good. It just completely lost the sound. Check if the protection

Sony receiver stede485 display shows "protect" ? What does protect mean and how do I fix There's apparently a short in the speaker wire.

Display showing PROTECTION if this is a sony receiver, that usually means there is a blown amp channel that will need to be repaired before the unit will power up correctly.

...sony device and then turn the device back on again. Watch to see if the issue occurs again. And if not, please add all of your wires back. Thank you. check connections and speakers if ok bad amp The ...