Questions & Answers for: sony rear projection tv thermal

...tv turns off i have 50in. sony model #kp57ws510 the timer stand by button in front of my tv keeps blinking 8times stops for about four secounds and countinues blinking 8times again. thank you. Check ...

Sony 57"wide screen TV Model kp57ws510 The TV is like I am seeing double, there are lines on the left and right side that are blue gray and red. Is this something I can repair or must I take it into a

...sony tv model kp57ws510? They are usually 3.5 amp picos depending on what circuit they are in. If you go to this link and leave a email with your model number and pico number such as PS321 they will ...

...sony 57 model# kp57ws510 rear projection hdtv Video output IC on either the CR, CG or CB pcb boards is most likely the problem or the A board is defective. I would try the video output on the CR, CG ...

Is my Sony KP57WS510 T.V. HDCP compliant? Contact Sony

sony model kp57ws510 rear projection. convergence problem. convergence button on front of tv does nothing There are a set of convergece chips that need to be replaced. If they have been replaced and ...

What does the convergence IC' for a Sony KP57WS510 look like. here is photo of typical chips: and what heat sink looks like. SD TECH it looks like this but should have stk-392-560 number on it.

sony kp57ws510 model tv has double vision and the double vision that shouldnt be there is in blue and red..whats wrong with my tv? The tv have a problems known as a convergence problems,it dead.The tv

...Sony Rear projection LCD TV, the picture just faded and disappeared. BUt the sound is still on. Does this mean that the bulb needs replacement? Check how many times the lamp light is blinking, if it ...

tv looks like its in 3d The problem is called "convergence" You can get the repair kit here: http://www.amazon.com/Sony-KP-57WS510-KP57WS510-Convergence-Repair/dp/B006B9NN1W I don't recommend that you