Questions & Answers for: solid green ethernet light

solid green, then the modem is fried(except the fact that the adapter is plugged and working). 3. If the Power is green and Ethernet is off, then check for the LAN cable at the back of the computer if

...solid green, a DSL light solid green and on. The internet and ethernet lights should be blinking green if sending and recieving data. I'll bet thats amber and not orange. In which case you have a ...

...solid green Hi my actiontec gt704wg gateway has a solid red power led and the internet led is solid green and the ethernet led's all flash gren every few seconds This is a sin of a bad unit already, ...

...solid. so i wouldnt worry, the green lights on your router and computer are normal and you should become concerned if these lights turn yellow or stop blinking completely. Good Luck and Please Rate ...

...solid green? To my knowledge of computers (which is very minimal), all lights EXCEPT "Internet Activity" should be constant green. The modem is connected to a wireless router, and the computer says ...

solid green. Ethernet = When lit, this light indicates that the modem is communicating with your computer. This will be on only if you're using the Ethernet cable to connect the modem to your computer

...solid green. The "Receive" light is blinking green. The "send" light and "online" light are not on at all. The "PC/Activity" light is a solid yellow. only IPS ...

...solid green, dsl light stays solid green, then I receive Internet connection.. After about 30 seconds it resets and starts the whole process over. Tried the reset button and I don't feel like ...

...solid green, it indicates that your cable modem has a good connection. If the light is off, check modem's physical connection. Verify that the Internet light on your wireless router is solid or ...

...solid green, when I only have a DSL connection? My ISP and landline phone is with CenturyLink. My CenturyLink modem with built-in router is ZyXEL: Model# PK5001Z. I have DSL High Speed Internet that ...