Questions & Answers for: soldering headset wire

Ad

Question about HS-23 Headset

2 Answers

...soldering of the middle section. I checked all the wires in the headset using continuity tester and I found all were working. I just need to solder the wires that has been plucked off from the mic ...

Ad

Question about (AHS-322) Headset

1 Answer

...headset by cutting the wires. Then I striped the wires. But I noticed that there were only 4 wires, yet there were 5 places to solder. Looking at the part, There are 3 connected wires that I have not ...

Ad

wire a headset to stereo phone jack. I need to wire a headset with mike to a stereo phone jack. So we have a common ground, a wire for the mic, and a wire for the mono speaker. Which one gets soldered

Question about PC Microphone (Black or Beige) Microphone

2 Answers

...headset wire, i repaired the wire and now the headset / mic dont work. Is there a trick to repairing broken wires after exposing the enameled wires...light a match and burn the enamel off the ...

Question about LifeChatâ„¢ LX-3000 Headset

1 Answer

headset and microphone. I just want to be sure that I am soldering my wires correctly. You cant wire then directly  there is a USB D-A chip that controls the headset converting to 1/8" mini plugs

...headset. And the wire from the head set to the controller broke I cant find a replacement part. Can you tell me what to order or get one from? You would have to solder the wire together and get some ...

Question about Spanish Level 1-2-3 Full Version for PC, Mac

1 Answer

headset right - blue wire L - heasdet left - red wire M+ - microphone + - green wire M- - microphone - gold wire. Use hot soldering iron to 'melt' off the tip of the wire coating and apply tiny amount

Question about .Audio 355 Multimedia Headset

1 Answer

...wire you are soldering. It is usually a coating on the wire and may not be easily seen. If solder sticks easily and well to the wire, the coating is probably removed. If you can, check for continuity ...

Question about Reference 420 On-and Over-Ear Headphones

2 Answers

...headset cable on the central pin of the jack. Repeat soldering steps as before for the ground, positive and negative wires and terminals. Slide the headphone jack cover down the cable and screw onto ...

Question about USB HEADSET H390

1 Answer

soldering point correspondence? wires from the headset are in three bundle of 3 + 2 + 5 wires. Wire color are copper (3), red (3), green (2) blue (1) and green/red (1). the headset has a mic. any help

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Brad Brown

Level 3 Expert

18060 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...