Questions & Answers for: soft tub cover

...tub drain. I snaked both openings but I keep on running into an obstacle. Its not soft and I don't get any debris up. Could something have broken or or is the S-trap broken? If so how do I fix it. ...

...tub with HOT water with 2 cups vinegar and 1/2 cup of Borax washing powder (baking soda works well too) I scrubbed the fabric w/ a soft brush and swooshed the loose fabric around in the water. Then I ...

...tub is. A slow water fill speed could cause this. This means the dishwasher may not be able to detect the water level. Inside the dish washer, when empty of water, to the left or right front at the ...

...soft rubber hose coming off the bottom of the tub,, take it loose and look down in it , there is a white plastic trap in there to collect things such as coins and socks,, if coins get in there then ...

...soft-sided hot tub). It allows water to seep into the lid (between the outer cover and the thick styofoam part) which makes to too heavy to lift and causes mildew. I would like to seal these small ...

soft tub dead,,power past gfi is the cover safety switch been shut off? may need to tape it down to check the rest of the relays and switches,

...tub, on either the left or right side. Gently lift up on it and CAREFULLY listen for a soft "clicking sound". The click is from a tiny switch on the underside of the washer. If the float is clear of ...

...soft humming sound only(from the motor trying to spin) and then the dishwasher will shut down due to it detecting a malfunction. Check the float switch in the tub to make sure nothing has gotten ...

...soft specks How can we deep clean out machine? hi David. Fill the washer using the highest load size, hottest water setting, and longest wash. Open the lid and as the washer tub fills, add a quart of ...

...soft-bristled brush to scrub the jet openings and the interior walls of the tub. Drain the Tub: Refill the tub with clean water and run the jets again for another 10-15 minutes to rinse out any ...