...Lamp socket from the CHMSL housing. Bulb from the socket. To Install: Install the following: Bulb into the socket. Socket into CHMSL housing. Battery negative cable NOTE: after completion verify lamp ...
...and low beam bulbs. I have the cross piece removed as per OM but can not get lamp to remove from car as stated in OM. Usually you need a quarter turn left to unlock the bulb socket from the
...lamp to the lower deck and the quarter panel.Remove these bolts or plastic wing nuts and remove the assembly from the car.To change the bulbs twist the socket and pull the socket and replace the ...
...shelf panel, disconnect the lamp socket from the CHMSL housing. Remove bulb from the socket.INSTALLATION Install the bulb into the socket. Install socket into CHMSL housing. Verify CHMSL
...TURN and your RIGHT TURN are LIGHT GREEN/TAN. Although the wire colors are the same at the bulb sockets, these are SEPARATE circuits and must be wired to the correct wire at the converter box. ...
Usually answered in minutes!
439 Questions
405 Questions
313 Questions
291 Questions
285 Questions