Questions & Answers for: Kodak socket for lamp

lamp socket that the lamp seats in can build up material from arcing on the contacts and that material insulates the contact surface from the lamp pins. There are still parts (lamp sockets) available

...socket. You want that bulb in there firmly so it doesn't arc electricity, which will corrode the lamp sockets and the bulb's prongs. Be careful to keep the lamp as even (level) as possible when ...

...things: it could be the lamp thermal fuse has opened or it could be a bad lamp socket. Sounds like you need to seek out a factory-trained repair dealer for this one, to narrow down the

...lamp on the cam which is blinking. If you're still experiencing problems after that: Here are the steps: 1. Make sure you will install a new or fully charged battery/batteries into your camera. 2. ...

...up on the lamp socket terminals, caused by arcing. This material build-up causes higher current loads and will ultimately shorten lamp life. A new lamp socket is a simple solution to your

SOCKET to attach the camera to a tripod or place it on another firm support. Open the LENS COVER/FLASH to raise the flash and to turn the camera ON. Press the MODE-SELECTOR BUTTON repeatedly until the

...what usually causes the condition you are seeing is a loose terminal in one or more of the lamp sockets or the mating terminal assemblies (the one on the lamp module & the one in the

...lamp socket. If you want to do it yourself, you can get parts from a factory-trained dealer or you can have them make the repair. Typically a lamp (depending on the style) should last between 15 and ...

...lamp socket contacts have a build-up of material on them caused by arcing between the socket contacts and the lamp pins   NOTE:  Any of these items will also drastically reduce lamp ...