...lamp assembly will unscrew from the unit by turning it counterclockwise about a quarter turn. Take the bad bulb to an auto parts store and get a replacement. The bulb will only fit one way into its ...
...terminal to have a bare metal contact. Did you check the bulb socket of the right brake lamp itself? Heat can cause the terminals plastic surface in the socket to be deformed . Check on this
...lamp socket and pull the socket off the lamp base, wires attached. Turn the locking ring counter clockwise (or on some models (9005, 9006), simply turn the bulb itself). Pull the lamp straight out, ...
...lamp sockets and wiring harness. These sockets usually rotate to one side or another to interlock with the housing. Once the socket is removed, you can replace the bulb and return the housing back to ...
...lamp. I have taken off the two bolts on top, and the nut at inside lower corner, but seems still held at outside edge. Surely the plastic bumper and/or the front fender/mud guard don't have to come ...
my drivers side 96 honda accord corner lamp isn't working. it's not the bulb, and the passenger side is working. could it be a relay?if not, whats the problem? Socket or ground near lamp
...socket still doesnt' work. Any ideas of things to check. Folow the cable with a test lamp. When you get to the break the lamp does not work. We used an old side lamp bulb for testing as it drew about ...
...each lamp. so both dont die together, (big danger that) if one lamp is dead, use a voltmeter, at the lamp got 12vdc there, HL switch on, then the lamp is burned out. measure at the socket,
Question about 1984 GL 1200 Aspencade Gold Wing
...lamp won't work. Fuse and bulb are good and there is power to the socket changed bulb and fuse checked with volt meter to see if plug has power. Check bulb. If power is going to socket then the bulb ...
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions