Question about A920 InkJet Printer
...or new ink cartridges in the printer ? Let me know. I had the same problem with my cartridge. I soaked it in hot water for a minute or two three times. It started to print but then soon became ...
...WAS STILL NOT WORKING SO I WENT TO www.inkjetOasis.ca & clicked on printer help. What a relief! I soaked the cartridge in 1/4" of 50% rubbing alcohol & water & put 2-3 drops in the sponge head on ...
Left catridge is wrong we soaked it and still reading that the cartridge is wrong Had a similar problem and tech support, after going through all the fixes, stated that the cartridge is defective and ...
Question about A940 All-In-One InkJet Printer
...To be very sure of this, place nuzzle in a plate/saucer with a bit water so that the nuzzle is soaked. Leave for about 10 minutes. Then apply the The Cartridge electronic panel is dirty: The ...
...mineral deposits and not dissolve the dried ink properly,... not to mention the water will not get up far enough, due to air in the water. I had the same problem. I simply had to buy a new ink ...
Question about 948 All-In-One InkJet Printer
...on the back side - how can i fix this? clean the end of the black ink cartridge with a cotton bud or something like that and then pour a bit of mineral water not tap water over it then clean it
...it will also not hook up via wireless Soak your cartridge in some water for 2min and then try printing and for the wireless part contact DELL Customer care they provide free
...plugged up over a period of disuse. Maybe try to wipe the ink jet cartridge nozzles with a cloth soaked with rubbing alcohol to clean. But, if that doesn't work, then new cartridges are indicated ...
Question about Dimension 2400 PC Desktop
I called epson because for some reason suddenly (i have that printer for years) the printing display when you click on properties is corrupted meaning it does not let me click on advanced option. We ...
Question about 1320c Laser Printer
...the out of black ink light is still on. Won't print Try it.......Remove the print head and soak it for three 5-minute cycles in hot (~170 F) distilled water about 3/4 inch deep with ...
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions