...have a BJC2010 (I don't print very often)my printer would not print blue and red. I took it out and soaked in hot water as someone else suggested. Well it worked for the red that is fine now, but the ...
Question about PIXMA iP4000 InkJet Photo Printer
...Printing Cannot do Automatic Print Alignment Printheads were blocked, tried several deep cleans, soaked printheads and appeared to have cleared, would print all bot yellow, put a red cartridge in ...
Question about PIXMA iP5000 InkJet Photo Printer
...comes out facing down into the container and soak for about ten minutes. After this dry off for with a paper towell and make sur each cartridge leaks color into the towell. may take a little
Question about Pixma iP6000D InkJet Photo Printer
clogged print head nozzle. Deep cleaning (multiple tries) & replacing cartridges did not help. This doesn't make any sense. The nozzles are ON the cartridges. When you replaced the cartridges you ...
Question about Pixma iP4500 InkJet Printer
...cartridge to the printer is not soak).. Place the printhead on the hot water and leave it there for about 4 to 5 hours..move it on different location from time to time..After soaking, rinse it with ...
...cartridge and clean it again using a piece of white paper with a small amount of methylated spirits or mineral turpentine i cant gaurantee this you might have to buy a new one you must have touched ...
Question about imageCLASS MF5750 All-In-One Laser Printer
...soak the ink cartridge, place it in a Styrofoam cup and fill the cup with water until the ink cartridge is halfway immersed in water. If the ink cartridge does not print after this is done, try ...
Question about PIXMA iP4600 Color InkJet Photo Printer
...cartridge carrier clean with warm water and put in a zip lock plastic bag for storage. Remove the printhead and soak the printhead, printhead down in warm distilled water overnight. After the ...
...need to remove the ink from the cartridge itself. Soak remove the cartridge and soak it as is. You will get a huge colour change in the water but it will not use any more than 0.1ml of ink regards ...
cartridge. (4) Repeat this until there is no ink residue coming off on the cotton swab. (5) Once finished, allow to dry and replace the cartridges (6) Try to print something now If that does not work,
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions