Questions & Answers for: Jeep Grand Cherokee snow

My 1999 Grand Cherokee Ltd. (Quadratrac) is not going into 4WD when the wheels spin on ice/snow. Is this a big deal and require a Jeep Dealer to repair, or will my neighborhood garage know how to deal

I went off roading and got stuck real bad in my 1994 jeep cherokee. After being towed out of the snow all that works is 2WD, theres no snow or ice jammed in the linkage but all it will do is grind ...

Just got 20 in of snow. Now the car makes popping noise when turning corners and makes a weird noise when driving straight. if you have a biuld up of snow in the cars engine bay under tray or wheel ...

ABS light is on, have had tons of ice and snow, car turns but doesnt turn completely over give it a few days? The wheels may be packed with ice and snow affecting how the sensor reads the exciter ring

... The only way to get the light of is to have the problem fixed. If your in an area that has alot of snow right know, it is very common for snow to get packed up in the wheel areas and cause the light ...

When it snows it seems we get alot of packed snow When it snows it seems we get a lot of packed snow underneath the jeep and then it makes it hard to turn sharply in the jeep without it jerking. How ...

in deep snow what mode do u drive in under 35mph its normally recommended that you utilize 4 wheel low it is good for maximizing the torque needed to pull out of deep snow. Moderate-Aggresive Mud and ...

2004 jeep grand cherokee laredo after driving through snow drift vibrates and is loud I do it all the time. the reason that happens is snow packs in the rims and tires and causes the tires to be out ...

...store... I can only offer you what I know based on experience. A good "All Season" M/S (mud and snow) tire rated "Traction A" is OK for "all season" driving UNLESS you are facing allot of mud and ...

for?? The switch is to put the vehicle into four wheel drive for off-road and increased traction on snow and ice. Four-wheel drive is used to engage all 4 wheels. This is used in low traction surfaces