Questions & Answers for: snorkel work

...back down Does nothing but goes up and then down. All buttons seem to be working. HELP one of the snorkel switches is bad if that not the problem i would then change the board but i would start

...work on the surface by allowing the wearer to have his/her face in the water so that one can look at what is going on and the top of the snorkel is several inches above the surface allowing the user ...

...snorkel) apply a pro grade anti fog. or dip. I live in FL and use 500 PSI brand. It works great for me in the warmer water temps. A small bottle is like 6 bucks, but considering what we spend to go ...

I bought this snorkel used and put it in my bathtub last night and it filled with water. The lower chamber is filling to the point I can't even blow it out. Is there something I don't know? From what ...

Lumix dmc-ts1 will not turn on after taking underwater pictures Lumix dmc-ts1 stopped working while taking pictures snorkeling in water. Will not power up despite newly charged battery, with or ...

...happens, no sound. On something like this you are going to need to access the gear box #26. As the snorkel comes down it has to trigger the lower limit switch #28 & the upper limit switch #27

...snorkel tube off at throttle body and pull back out of way, then take a rag and soak with throttle body cleaner, carb cleaner, or brake clean...they all work well, then reach inside the housing and ...

...snorkel masks. If your mask is a different model, you can look at the related videos on YouTube and find one that has straps similar to yours. Oh, it took me a while to understand how these straps ...

...if they can work it out. Can you please give any suggestion as to cause and cure? Air turbulence causes an audible resonance in the snorkel. It was designed without taking that resonance into