Question about 2007 Mechanical Sewing Machine
...down an Elna serviceman. My Air Electronic SU got worn internally and my serviceman was able to repair it once for me. This happened with my 50 year old Elna Supermatic. It ran a bit slow, so I oiled ...
Question about 2007 Mechanical Sewing Machine
...machine to run,when I push down on the foot pedal it will not run.the computer works so there is power going to the serger,but when I push the foot pedal nothing happens the machine does not ...
...a new power cord and foot pedal and plugthem into the machine.can you give the name and model number of the sewing machineand someone can look and see if anyone can find the parts for
Question about 945 Computerized Sewing Machine
machine and it still carries on sewing!! This happens after the overlocker has been working for a while. What could be causing this?? sounds like there is a short in the wiring and the machine need to
Question about 945 Computerized Sewing Machine
My air control foot pedal does not work at full speed. It has been gradually slowing down. do I need a new pedal? it would be a good idea to have the foot pedal checked..
Question about 945 Computerized Sewing Machine
...air pedal works ok. I serviced the motor and replaced brushes. It runs very slow and only a little faster when the pedal is depressed. hi David, did you check the motor for tightness.
Question about 945 Computerized Sewing Machine
...sewing when I take my foot off the air pedal. The machine keeps running until I tap a number of times on the pedal or turn the machine off. Other times, the machine works very well. Is the pedal ...
Question about 945 Computerized Sewing Machine
...slow Is the machine mechanical (not computerized)? Most likely needs good cleaning & oiling. Wheel on right side that controls the needle up and down is very tight... Otherwise, search the ...
Question about 945 Computerized Sewing Machine
...slow speed now. Why? It appears to be an older mechanical machine. Has a thorough cleaning and oiling been performed on it? These old machines need frequent oiling with fresh good quality sewing ...
Question about 945 Computerized Sewing Machine
...sewing machine. The machine won't turn off once it starts sewing. it should normally turn off by releasing the foot pedal I have had it serviced and bought a replacement foot pedal. This hasn't ...
Usually answered in minutes!
175 Questions
46 Questions
36 Questions
24 Questions
21 Questions