sewing machine should not begin running when it is turned on. There is usually a foot pedal or something (like the gas pedal in a car) that governs the start, speed, and stop. Do you not have a manual
thread cutting Do you know if this model cuts the thread when your heel presses on the pedal? If you are asking about the consew CN2230R , the answer is No ; it does not have a trimmer system.
...DOWN . THE FAR APART WIRES ARE THE SLOW SPEED THE CLOSER ONES ARE FASTER SPEED THESE WIRES WILL WEAR OUT OVER TIME OR CORRODE OVER TIME AND CAUSE THIS PROBLEM. TRY SOME ELECTRICAL CONTACT CLEANER AND ...
the material around, as otherwise the thread beneath will just stretch over and make a new stitch. just slow down loads and should work! this probably isnt the right answer but hope i may of helped! :
...machine but not the manual. It starts very fast so,I'd like to know if it has a speed control. Thanks I slowed mine down by replacing the pulley on the head with a larger pulley that I bought at the ...
Question about 7360R-1 Mechanical Sewing Machine
...sewing machine wont turn handwheel when pressing foot pedal to stitch. Your belt may be to tight you can loosen the belt at the wheel under the table. Loosen the screws and shift so the belt
...slow down the consew 206rb The motor says its rpms are 1425/1725- we want to know if there is a way to slow it down by motor, or by pulley , and if so, how do you go about it? You don't say if it ...
Question about 226R-1
...sewing machine will not feed the material through under the needle The walking foot lever is not touching the material . is the knee pedal adjusted right . is the manul lever on the back down. I've ...
Question about 226R-1
I have a Consew 210 and I am trying to slow it down. I was told to put a smaller pulley on the motor and a larger one on the machine. Is that correct. The motor has a 60mm pulley now. yes it is
Question about 226R-1
...Slow down the speed of the machine when sewing on thicker materials. This will help the machine to handle the thickness and prevent skipped stitches or broken needles. If none of these adjustments ...
Usually answered in minutes!
124 Questions
84 Questions
19 Questions
22 Questions
17 Questions