Questions & Answers for: slip light on Sewing Machines

...light weight cotton knit, the stitches will often slip off of the fabric, though the edge is being cut. I have tried putting the differential feed below normal, but this still does not work. I have ...

...needle hight, the tensioners, the bobbin rension, belt tensions. i had a machine, that the belt was slipping, and the tension was set too ...

...Hold the bobbin case up by the thread and it should hold itself. If you jiggle it slightly and it slips down a little, you are very

light. Any recommendations. Go to your local dealer, they should change it for the cost of the bulb only Its real easy to change. There is a little tool that came with sewing maching that you reach up

...light comes on, so there is power. Mechanics can turn by hand. Was working, but had to dismantle fly wheel to solve a different problem, when put back together is when problem occurred. First - why ...

bobbin holders keeps slipping and thread tension issues bobbin holder problems slipping Make sure the needle is at it's highest position. Lift the latch on the back of the bobbin case. Hold it open ...

...thread path located at the top of the machine is threaded correctly. Hold thread in both hands and slip under transparent thread guide. While holding the thread securely, pull the thread towards you ...

...may be from the top thread tension is too light. check the needle / hook timing as it may have ...

The tention is not holding the material in place slips around when im sewing . Do you guide the material with your hands while sewing? Sounds like the presser foot pressure is too light. Most machines

...of adhesive cellophane spun off the drive drum of my older model type 6 belt sander and belt now slips. the material bunched up while in operation and worked its way off the drum. any fix? the ...