Questions & Answers for: sliding door roller

sliding door How do you replace the glass on the sliding door of a windstar van? It looks like there is no track or seal. this is the link to the information http://www.swisco.com/Screen/how-to-repl..

...sliding door,their right below the window at the rear of the door I found the two bolts holding the rollers in place and removed them with a 12mm socket. the new mechanism simply replaced in the same ...

...sliding door roller located on the back of a 2001 Chevy Astro passenger-side sliding door. you need to call your local dealer and tell them the VIN number. they will be able to tell you the part ...

...sliding door has upper roller, lower roller, and center roller mechanisms. These rollers can become damaged and rattle in their respective tracks. The upper and lower rollers are easy to inspect, as ...

How to change rollers on Pella sliding doors Remove the door from the rack. St it on its side, a few screws hold them in, Unscrew the assembly and replace it.

...sliding glass door? I would go ask a professional how they do it and what they recommend for the Pella brand glass door you have. After they give you some advice go to your local hardware store and ...

...sliding door will unlatch, but why doesn't it slide open? These vehicles have had trouble with the center roller becoming bent and or the rollers becoming loose causing the door to bind. There were ...

...sliding glass patio door to lanai that will not stay shut tight? Sliding glass doors leading to lanai porch. It is four panels and opens and closes in the middle, if that makes any difference. When ...

...sliding door as it moves through the center track located below the rear side window glass. There are also an upper and lower roller, but they don't bear as much weight as the center roller and act ...

door. The sliding door has come out of the bottom track. Is there a knack to get the fitting back in? There's a plastic fitting that needs relocating. Thanks It's a Panavista sliding mirrored wardrobe