Questions & Answers for: Mazda B2200 slave

my cluch is not working and i already changed the slave cylender what do you mean not working, does it not disengage to shift or when you let out the clutch does it not go?(the latter means the clutch

...of foot before tries to engage, then works again. No noise from throw-out or clutch disk. Bled the slave cyclinder. Still sticks. I'm thinking the clutch slave cylinder may be bad. Cannot find a

...dot 3 fluid level in the master cylinder o.k. ans there are no leaks from either the hose or slave cylinder. Replace both clutch slave and master cylinders, and bleed well. I've also had this ...

have a leaky clutch slave cylinder, keeps losing resistance on clutch pedal, repeatedly bled to get pressure again , how do I fix this problem ? Replace the clutch slave cylinder and re-bleed the ...

...the left (between the brake master cyl and the fender) if its empty, replaced the clutch master ans slave cylinder, if its full, replace the master and slave. let me explain. if its empty the slave ...

I just bought a slave cluth and some how I can not get enough fluid into the system to build up pressure in the system what;s going on try just siting ther and pumping ur heart out i have had to pump ...

...of fluid and there does not appear to be a leak you may need the clutch replaced if the clutch slave cylinder and master is working. CLUTCH GOING TO THE FLOOR COULD BE BROKEN RELEASE BEARING OR ...

1990 mazda b2200 clutch sticks to floor Check the fluid in the hydraulic clutch resevoir. Change the clutch master cylinder, if still sticks there will be need to also change the slave cylinder.

...pressure. few things could be wrong, master cylinder (mounted on firewall) could be dead might be slave (gearbox) check both, get someone to push clutch while looking at the fluid in the master if ...

...hydraulic clutch system
if the clutch master cylinder is full of brake fluid
master or slave is by passing

shift linkage out of adjustment
worn clutch or pressure plate ...