Questions & Answers for: Sharp slave

...trouble (ICU detection) Detail Communication setup error, framing/parity/protocol error Cause Slave unit PWB connector improper connection Slave unit PWB ? ICU PWB harness trouble Connector pin ...

...but not picture. I have done the flashlight test and can see images. I replaced the both master and slave backlight invertor boards, but still no picture. There are capacitors very close to the ...

...but not picture. I have done the flashlight test and can see images. I replaced the both master and slave backlight invertor boards, but still no picture. A member of your team said to replace the ...

...inverters were bad, the problem is that the display stays dark, So I replaced both the Master and Slave Inverter boards only to have the same result no display or sound. If I hold my LED flashlight ...

where is the location of the slave unit i have problem e7-00 i have check steps but i don't know the location of the slave unit A E7-00 deals with the laser unit. It is removed from the left side ...

...trouble (PCU detection) Detail - Communication setup error/framing/parity/protocol error Cause - Slave unit PWB connector improper connection Slave unit PWB - ICU PWB harness trouble Slave unit

...It was crazy frustrating trouble shooting this. I measured the transformers on the master and slave inverter board with a multi meter. The resistance should be 1.31 k ohms. All but one measured ...

...It was crazy frustrating trouble shooting this. I measured the transformers on the master and slave inverter board with a multi meter. The resistance should be 1.31 k ohms. All but one measured ...

Why does my Sharp copier ar-m205 scan black & white only? how to slave error H4

...ICU detection) between ICU and PCU (when the scanner is installed) Cause: - Defective connection of slave unit PWB connector - Defective harness between slave unit PWB and ICU PWB - Slave unit PWB ...