Questions & Answers for: Mazda slave

Broken slave cylinder for a 1989 AT Ford Telstar I'm not sure where the slave cylinder is located so i can change the part can some one help? the slave cylinder is mounted on theĀ bell-housingĀ of the ...

Ad

...check the line from the reservoir to the transmission for leaks, unfortunately its most likely the slave cylinder in the bell housing. Look under the bell housing of the transmission for any brake ...

Ad

...dot 3 fluid level in the master cylinder o.k. ans there are no leaks from either the hose or slave cylinder. Replace both clutch slave and master cylinders, and bleed well. I've also had this ...

have a leaky clutch slave cylinder, keeps losing resistance on clutch pedal, repeatedly bled to get pressure again , how do I fix this problem ? Replace the clutch slave cylinder and re-bleed the ...

...the left (between the brake master cyl and the fender) if its empty, replaced the clutch master ans slave cylinder, if its full, replace the master and slave. let me explain. if its empty the slave ...

What's your problem?how to bleed a slave cylinder What's your problem?how to bleed a slave cylinder Most parts stores have a pressurizer for the brake fluid.  You need one.  Set up the ...

WHERE IS LOCATION OF SLAVE CYLINDER ON 2004 RX8 Normally the slave cylinder is mounted on the bell housing or just inside where the clutch arm is located. If you look down on the driver's side of the ...

...clutch operation. This is a clutch master cylinder with a reservoir on the firewall, and a clutch slave cylinder down on the bell housing of the transmission, with a steel tube running from the ...

Question about 1999 B2500

1 Answer

slave cylinder just want to know where the slave cylinder is located on my mazd b2500 1998 four cylinder 2.5 Should be mounted on the transmission bell housing. Follow the line from the clutch master ...

Question about 1999 B2500

1 Answer

clutch slave cylinder i installed a new clutch a presser plate and a new slave cylinder. but as it stands now the rod on the slave cylinder is fully open, pushing the throw out bearing on the plate. i

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 6
2004 Mazda 6

738 Questions

2000 Mazda MPV
2000 Mazda MPV

692 Questions

1999 Mazda 626
1999 Mazda 626

544 Questions

2001 Mazda Tribute
2001 Mazda Tribute

609 Questions

2002 Mazda Tribute
2002 Mazda Tribute

615 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...