Questions & Answers for: Geo slave

...worked fine until now when we can't change gears at all. What's the best bet, master cylinder, or slave cylinder? your master cylinder is your brake cilynder. Your slave is the clutch hydro

how do i check slave cylinder all you can really do is check to see if the boot has liquid in it. This would indicate a failing slave cly.

...its very hard to shift the gears when u can get them in. someone told me they thought it was the slave cylinder im trying to find out what ur car does when that goes out. If it is then it will be ...

clutch will not disengage You should have a hydrolic system that is operated with a clutch slave(on the side of the trans) it could be leaking fluid or a clutch master cylinder under the hood next to ...

clutch slips on 96 geo prizm. broke down on the interstate. had it towed home. bled the slave cylinder it does move now but the clutch slips. The clutch has been replaced a few years ago. usually a ...

how to remove rear brake cylinder remove wheel. remove drum. remove slave line. remove shoes remove slave screws then slave. slave = wheel cylinder (slave) capacity varies by casting variances. but ...

...do i change the rear brake cylinder remove wheel in drum remove springs. and shoes. remove screw to slave remove slave. cylinder, or go to alldata.com and read. its all there. remove the wheel and ...

...Hydraulic on othere open hood, see that MC for clutch, is the Reservoir dry? yes, no? yes, then the slave or mc is bad or both, the one leaking is bad. Most cases Hydra clutches can not cause slip. ...

...cable is bad, (if it has one) (seems it dont) or the clutch master cylinder is dry, (leaks at slave are super common, is it leaking? at slave or MC?) last is clutch bad, and vastly more ...

92 Geo storm do I have to pull the tranny to replace the slave cylinder Not normally. The clutch slave cylinder is externally mounted. Get one or the tyre chains to change it. ...