Questions & Answers for: sl q3

sl q3 and stereo sa -r40. the sys is not working can u suggest repair agency at new delhi Technics parts are discontinued, so it will be very hard to find a service center who will take in these units

random my 1210 has stopped working, when i turn it on and press start it either turns half a rotation or if its left a min or 2 it starts to spin at abouts 150rpm and dosn't stop when the stop button ...

SL 1210MK2. Does anybody know if the repair parts are available and where to get them. Also is it easy to "Do It yourself"?? I would greatly appreciate any input. Thank you! Aris Tomas hi aris tomas..

After mixing for a while the turntable (1200 technics mk5) starts to lose the pitch or the record starts jerking up near the -5 or -6. hi! there is a problem inside your turntable (on the main board) ...

its not working and when you press the trigger there is a smell of burn HI,, IF YOU HAVE EXPERINCES TO OPEN THE TURNTABLE PLS. DO..FIRST TAKE OFF THE PLATTER THEN THE 4 SCREW AROND THE PLASTIC COVER ...

...but also can happen if the deck is turned on and started with the platter removed. Free Technics SL1200 / SL1210 service manual available here :- http://www.technicsdjuk.com/ ...

SL-Q3 manual Need a copy of a Technics SL-Q3 turn table Owner's Manual Technics SL Q3 Manual Fully Automatic Quartz Locked Direct Drive Turntable... cheers john. stylus city

technic 1200mk2 pitch problems I replaced the pitch fader in both technics 1200 mk2 turntables, calibrated the faders to 2.70, adjusted the pitch parameter, and one of my turntables is still having a ...

there is power going through my technics 1210,but the platter & strobe light still will not work the target light shorted out my technics 1210,i replaced the q1,q2 & q3 and also the d3 and it ...

Technics sl-q3 Manual http://www.eserviceinfo.com/downloadsm/59223/Technics_SL-Q33.html