...screen broke so i dont know how to use remote for sound only for volume Volume buttons are not on the touch screen, they are below it on the face of the radio and are clearly marked on the
...connect the second blue wire to the remote wire going to the amp, now your sound should be right I think you are on dual zone mode. Access your menu and switch to single zone see if it work.
...sky system, and shortly afterwards "protect" appeared on the Kenwood system, as all the sound comes thruogh it this has blocked it from working. Is there a common password to unblock the ...
When I record there is no sound for a bit I record a show and when I play the show the sound goes out. Has anyone experienced this issue? When using what kind of a Machine???
...a Kenwood Surround sound system and the remote control will work with everthing but the reciever it came with. It will not turn it on or off nor will it adjust the volume. remte control lost ...
Sky / TV remote controls the picture. You may need to tinker with some settings on the Amp, for example on the front of the Amp you will find a source button, toggle through the 3 or 4 options to give
sound, The Radio works fine but when i try to you a cd or a dvd there is no audio. I've checked my connections seval times but can not figure this out. it sounds like you are using an amplifier. if so
sound when playing cd. Are you using an amplifier? If you are, it sounds like you are using the blue wire (power antenna remote turn on) instead of the blue/white wire (amplifier remote turn on)
kenwood vr 209 - no sound from speakers when playing radio no volume, no sound from speakers, mutt flashes then stop. remote control wont turn system on and off Check batteries in remote
remote control to unmute the sound. The "MUTE" indicator should turn off. Manual Adjustment: Navigate to the receiver's setup menu and locate the audio settings section. Adjust parameters such as bass
Usually answered in minutes!
202 Questions
203 Questions
165 Questions
142 Questions
149 Questions