Skil saw motor runs but blade won't spin My Skil saw 10" table saw FO1234000A model 3400 13a 76909 that I've had for about a decade blade stopped spinning. First it spun but didn't seem to have a ...
...Skil Saw 10'' table saw model 3400 13A motor stopped working. The saw cut normally until I shut it off. Now it won't move at all when I turn the saw on. The switch tests ok. When I turn the motor on, ...
I burnt out the motor on my Skilsaw Model# 3400 13A, Where can I buy just the motor? LOOKING FOR A MOTOR FOR A 3400 SKIL TABLE SAW Try wwgrainger.com or grainger .com
Question about 3385-01-RT Factory-Reconditioned 9" Band Saw with Light
...motor rpm on a skil 3385-01 rt table bandsaw? This Band Saw is designed to use a 1700 RPM motor. It is wired for operation on 110-120 volts, 60 Hz. Taken straight from the Owners Manual found here. ...
...and the blade is not turnning the motor pinion gear is damage. Go see this link for parts diagram. ...
Skil Octo Sander Model 7302. While using the sander the motor slowed down to a crawl. The speed/vibration is so low it cannot sand anything. I had to resort to the old way of sanding, by hand. When I ...
Question about Top Handle Jig Saws Variable Speed Jigsaw 4.5 Amp Motor Tool
oil leak from my Skil Jigsaw and it keeps Jamming when I cut wood I was using my Skil Jigsaw model 4445 to cut wood and it started leaking oil and then it was jamming every time it came in contact ...
Skil 3316 Compound Mitre Saw 10'.... had a broken handle (my brother-in-law ran over it!) in order to do the glue up better I removed the motor cover out about 1 inch. At this point cover is stuck
Question about 10-in 15-Amp Compound Miter Saw 3316-03
...motor for 3400 skil table saw? my motor got hot, burned the plastic case, brushes , armature, did not damage the fields or windings, however since the brushes and brass holders burned up, I need a ...
Usually answered in minutes!
386 Questions
103 Questions
81 Questions
63 Questions