Questions & Answers for: single switch

Question about / Legrand 1595-2SWT Combination Two Single Pole Switches & G

1 Answer

...single pole combination switch I would like to know how to wire from a 3 single-pole combination switch to a fan/light/night light. What wires do I need to pull to the switch and to the light? run ...

Ad

Question about Lutron S2-LFSQ Skylark Dual Slide-to-Off Fan Speed Control and Dimmer 2 in

1 Answer

...single pole switch and I assumed that this would be easy. Where do all the wires go too? The old switch is just a single pole switch. The new one is for fan speed control. You need to use a regular ...

Ad

Question about COMBINATION SINGLE POLE TOGGLE SWITCH

1 Answer

...two different switches that control one light and a single (pole) switch that only controls one light. you can't do that with the above switch. You need a combination 3-way and single pole

85 chevy 3/4 ton pick up .Rear brake light and turn singles dont work but parking lights work,fuse is ok brake switch is ok and front turn singles work as well as hazerds for the front only work and ...

Question about Triple Deco Single Pole Switch

1 Answer

...single power wire. The other side of the switch had individual wires attatched to complete circuits. I wired the single pole using the one power wire and attaching the wires to the other side of the ...

Question about COMBINATION SINGLE POLE TOGGLE SWITCH

1 Answer

...single switch, and a duplex outlet with a matching plate. Your hardest part will be to decide the color of the devices and plate (rectangular, double-D holes, etc. I'd suggest, that for "preserving ...

Question about COMBINATION SINGLE POLE TOGGLE SWITCH

1 Answer

...single throw switch with a common (connected) hot wire that supplies it. What you had before was two separate single pole single throw switches and one single pole double throw switch that is used as ...

Question about MRD-M1000 Car Audio Amplifier

1 Answer

...still shock you with only 1 wire. It remains live. That type of switch is referred to as a single throw double pole. Meaning on and off but has 4 legs coming off of it cutting voltage to both

Question about MRD-M1000 Car Audio Amplifier

1 Answer

...Single Throw) to switch from two loacations. You CAN, however, use ONE Three-way dimmer on one end of the room, and one Three-way 'regular' switch on the other, if dimming from just one place is ...

single-throw switch; it is either on or off. The switch with three prongs is likely a single-pole, double-throw switch. That is, it controls two circuits but only one can be on at a time. For instance

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Electrical Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...