singer sewing machine Merrit. Needle is hitting something and not going into hole turn the machine slowly by hand as the needle goes down check it does not hit the foot ,then the hole of the plate. If
singer 6038 needle issues Hi, I have a singer 6038 and I am trying to hem some denim jeans. I bought the proper needle for this task (16/100) and when I put the needle in the machine, it, instead of ...
...do for Christmas........ Can someone help me?,,, Pleeeeeease Olga had to put singer 7422 since my model was not listed had to choose something. ure needle is too long. They sell differant size ...
Question about Inspiration 4210 Mechanical Sewing Machine
needle hits the plate, instead of going to the hole in the plate. i think the plate has been shifted a litte maybe the tip of the needle is bent or needle not correctly in
...Singer 7426. The needle is hitting the hook area incorrectly, making a jerking motion with the needle along with a tapping noise. Any idea how to correct it? the needle probable is bent-has to be ...
...hits needle plate sewing onto paper on stitch and tear and paper stuck onto calico with bondaweb the machine jams and needle plate shifts needle break? Check to see if plate is damaged or needle is ...
Question about 7426 Mechanical Sewing Machine
...Singer 6160's needle is hitting the bobbin plate. Can't figure needle setting. The needle keeps hitting the bobbin plate. first change the needle--flat side to the back of the machine, ...
Question about CG500 Mechanical Sewing Machine
Singer CG500 Needle hits the needle plate. Needle was replaced. Verified needle in correctly. Tried hand wheel - still hits. Machine has yet to be used!! Needle hits the needle plate. Needle was ...
Question about 8770 Curvy 225-stitch Computerized Sewing Machine
Needle hits plate under bobbin case wrong needle then it's too long If the needle is hitting, install a brand new needle because the old one may be bent or damaged. If it continues to hit with a new ...
Question about 8770 Curvy 225-stitch Computerized Sewing Machine
...needle is hitting the metal plate on a singer cg590 sewing machine. Is there a way to adjust it back into its correct position? Your needle plate may have been place incorrectly, and it's easy to do. ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions