...at most auto part stores. If you do purchase a new ignition module be sure that it does come with a silicone grease or a die-electric compound because it is a heat sink and the ignition module will ...
...at most auto part stores. If you do purchase a new ignition module be sure that it does come with a silicone grease or a die-electric compound because it is a heat sink and the ignition module will ...
...silicon grease to help prevent the new rotors from seizing on the same way. good luck! Yes they are supposed to come right off. What happens is they build up some rust in behind them and bind them ...
...hooked up. Sometimes dust and dirt will get in and cause you to lose connection. I use Electronic silicone grease in the connection to reduce dust accumulation and keep water
...the bolt. Check the wire end for rot (if it flexes too much) replace the ring terminal and put some silicone or heavy grease under it and attach securely to the frame. If that doesn't work you may ...
...other !!! do you have an ignition module in your distributor, if so replace it, be sure to apply silicone grease underneath where the module mounts, on distributor base, not the module. helps ...
...do i gease a door hinge? With white lithium grease in a spray can or wd-40 directly on the hinge Silicon based spray. Be sure to use it lightly and wipe up anything taht has dripped. Good luck, ...
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
604 Questions