...back just before the warranty expired I had call for a repair and the tech had sprayed some sort of silicone around the yoke, it help for about a year or two and now it's back. My question is does ...
...silicon grease washers on the output transistors? I understand that is a lot of labor and not worth fixing. What is your thoughts? With all speaker wires disconnected and still showing the protect ...
Question about (2450455) CD-ROM Drive
...it is simple to push the laser head along the rails to free it up, grease the rails with a little silicone lubricant and reassemble the drive. Optical drives are so cheap nowadays though, might
...silicon grease washer on the output transistors gets dried out and goes hard. It no longer is a good thermal conductor for getting heat from the output transistor into the heat sink it is mounted on. ...
...silicon grease washer on the output transistors gets dried out and goes hard. It no longer is a good thermal conductor for getting heat from the output transistor into the heat sink it is mounted on. ...
For the Sony PS-LX350H screeching turn table, where would I put the silicone grease? On the center spindle? That is the only moving part I see other than the spindle that turns the belt and I don't ...
...the cooling fan vent has a removable panel then you should be able to access the fan through it. A silicone based type grease should be used directly on the fan shaft after cleaning...do not use a ...
...the laser tracks take the lid off carefully there will be a lid screwed on top of the laser take it off clean the laser with a qtip and alcohol clean the track bars and put silicon grease on the ...
Question about A Alpha - Camera Digital Slt-a65v Slr - A65 - Sony
...silicon grease on this gears let it free by rotating the parts then fix the covers it will work properly, check the condition of the battery in some cases weakness of the battery also cause this ...
unscrew the zoom control motor, loosen it, some sort of sticky grease on the worm gear also obstructs, clean it with small brush or cotton bud. then apply a little silicon grease. don't let dust go in
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions
