Questions & Answers for: Toyota 4Runner signal system

Question about 1996 4Runner

1 Answer

...INSTALLED BUT NOW HAVE A CLICKING SOUND THAT SOUNDS THE HAZARD LIGHTS ARE ON ALLL LICHTS AND SIGNALS WORK FINE BUT HOW DO I STOP THE CLICKING NOISE EVEN WHEN THE KEY IS OUT OF THE IGNITION AND ...

Ad

Question about 1986 4Runner

1 Answer

...signal switch system, is pushed down. The high beams work when I pull on the handle for high beam flash, so it is not the sealed beams. Just the high beam switch will not activate the high beams. ...

Ad

signal /Blinker system promblem My left blinker light goes solid when the brake is engaged. Resumes flashing when brake is not engaged, No problem with right blinker , continues to blink when making a

...system that I know works (tried on another vehicle already). Tail lights work but no brake or turn signal function on trailer. Checked power coming out of the flat 4-pin pigtail from the 4runner. ...

...We changed the turn signal control. Didn.t help. Mechanic thinks the wiring from the warning theft system may be the cause. It was installed after we purchased the '98 Four Runner. check air bag ...

Signal - Engine Running P1349 VVT System P1400 Sub-Throttle Position Sensor P1401 Sub-Throttle Position Sensor Range/Performance Problem P1405 Turbo Pressure Sensor Circuit P1406 Turbo Pressure Sensor

...system or is the flasher unit breaking down? Also, cannot locate the turn signal flasher unit. Where is it???? right above your left hand foot if your not a brit in the UK or so. Some cars have 2 ...

Question about 2003 4Runner

1 Answer

...SIGNAL.. THEN SUDDENLY IT STARTS probably the security system or safety interlock. Is there a security light flashing? If not, try starting in neutral. Please see my tip at ...

Question about 2003 4Runner

1 Answer

system can be tested to find out which of the sensor is the problem with a scanner that reads the signal from the door sensors, since of the doors and the lift-gate (if applicable) can cause the light

Question about 2003 4Runner

2 Answers

...system malfunction CODE 12 - IS RPM SIGNAL POSSIBLE CAUSE DISTRIBUTOR OR CIRCUIT ECU. CODE 52 - IS KNOCK SENSOR SIGNAL POSSIBLE CAUSE KNOCK SENSOR OR CIRCUIT ECU. CODE 71 - IS EGR SYSTEM MALFUNCTION ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...