Questions & Answers for: Dodge signal system

...system runs through the signal switch so it can effect both systems. Start with the simple, like, is a wire loose? Look at the base of the steering column. Check plugs and such. I believe you'll see ...

...work. i tried looking for fuse and thats not the problem nor the relay. the whole turn signal system does not work. Most times the relay is in the fuse box or under the dash by the steering

...P0236-MAP SENSOR TOO HIGH TOO LONG WHEN MONITORED Engine running. SET CONDITION Boost pressure signal indicates boost pressure is high when other engine parameters (i.e. speed and load) indicate ...

...Signal Switch: CAUTION The Supplemental Inflatable Restraint (SIR) system must be disarmed before working around the air bag or SIR system wiring. Failure to do so may cause accidental deployment of ...

turn signal will not work turn signal will not work ,4way flashers will work there are 2 flashers for that system, one works the turn signals, the other work s the 4 ways.

Have a 2002 durango that the turn signals operate rapidly. Have begun replacing the back bulbs, still the signals are blinking rapidly, please help, :D Check the relay and the flasher Turn signals ...

...flasher for? There is one Combination Flasher that controls the turn signal system and the hazard warning system. It is located under the instrument panel between the steering with and fuse

...system Px4xx additional emission control Px5xx speed and idle regulation Px6xx computer and output signals Px7xx transmission Px8xx transmission Px9xx control modules, input and output signals P1457 ...

...diagram but I suspect you can't install it without creating problems in the ignition system. If you can hook it up it will need to pick up its signal from the crankshaft position sensor output

...signal flasher located on a 2002 dodge ram 1500 There is not a flasher in the newer dodge trucks. However there is a IPM(integrated power module) It is a solid state non-programable box behind the ...