Questions & Answers for: BenQ FP no signal to monitor

...to orange..help? When I tun my computer on the monitor displays BENQ and then goes black, saying Signal not detected....help? IT MUST BE A DPI.IF UPPER THAN 60Hz THE PROBLEM WILL BE OCCUR AGAIN.I ...

Ad

Question about FP71G 17" LCD Monitor

1 Answer

...monitor, it displays well at the POST screen but it seldom loose signals when it is in windows What do you mean by loses signal does display go off with power led on? If so resolder 2Sc 5707 ...

Ad

Question about FP71E 17" LCD Monitor

1 Answer

...try connecting monitor to known working CPU and determine if problem is with CPU (Graphics card etc) or monitor.Signal cable can also be a problem. Please rate solution and provide feedback. ...

Question about FP731 17" LCD Monitor

1 Answer

...is the problem. If same problem persists on another working cpu after changing signal cable,the interface board in the monitor could be defective. Samir PLease rate solution and provide

...Monitor shows "No Signal Detected" on startup In the last 2 days, this has been an intermittent fault on startup. Sometimes the monitor starts up Windows as usual when the computer and monitor are ...

Question about FP737S-D 17" LCD Monitor

1 Answer

no signal detected I trun monitor on it is lit then goes off and displays this message no signal detected Check all of your cables - VGA / DVI mainly in the back of the monitor and the back of the PC.

Question about FP737S-D 17" LCD Monitor

1 Answer

...to disconnect the vga cable then power on the monitor then it will show "no signal check the signal cable " massage if massage comes on screen then monitor is ok if no msassage then monitor is ...

Question about FP567s 15" LCD Monitor

1 Answer

...signal cable between your PC and your monitor? If you cable is connected properly and you are still getting that onscreen message, it means your monitor main board has failed, and if its out of ...

Question about FP91G+ 19" LCD Monitor

1 Answer

signal that is out of range. Check first by connecting the monitor to a known good video output (ie another computer). If that works, then the problem is with the source and not the monitor. Sometimes

Question about FP71E 17" LCD Monitor

1 Answer

the screen is on for few seconds with no signal then turns off Hello Check your cable, ask the cable operator about the signal, if these are OK, then the TV tuner gone faulty which needs repair. Good ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...