...Siemens AP/Router is at fault. This could have been brought about by lightning, power surge, plain hardware failure or system/software error. The red status light - on indicates an error (on the ...
Question about SpeedStream 4200 (13A4200001) Bridge
router. The pwr LED will blink red once, indicating that the reset has begun. 2. Continue depressing the Reset button for four seconds or until the pwr LED begins to blink alternating red-to-green. 3.
Red flashing continues today - 8 hrs later, but green lights stay on longer. Is modme dead? I have sbc (att) service- SHopuld I buy new modem? What do you reccommned I have the linksys wirelss router.
Question about SpeedStream Modem (4100) (SS4100)
Siemens Speedstreem 4100 ethernet adsl Modem red power light All lights on the modem are on and green except for the power light, it just blinks red, this happened 2 weeks ago all of the sudden and ...
Siemens gigaset se587 for about a year and I've never had any problems. But, I've not been able to connect to the internet for the past 4 days. All the lights on the router are green EXCEPT the online
...siemens se568 router? I have just connected it to my PC but nothing happens? I have a 3G Connetion on my Home PC using my Nokia Cellphone that I want to share with other devices in my home? hey try ...
Question about SpeedStream Modem (4100) (SS4100)
...red...what does this mean? It, means either your username pass word is not correct or the DSl line issue, Go to your router by typing 192.168.254.254 on your Internet explorer and go to Quick start, ...
Question about SpeedStream Modem (4100) (SS4100)
...siemens se587 router, followed the instructions on the disc to the letter but i only have the red power light flashing and no other lights, please can you help HI! I bliv u are having some issue ...
Question about SpeedStream Modem (4100) (SS4100)
...Siemens Modems/Routers. If you see an IP Address which starts from 169.xxx.xxx.xxx your network card was unable to pick an IP Address from the DHCP router which runs in the modem. (If you run a DHCP ...
...light when it flashes red release it. then you can go to the config utility 192.168.2.1 , you can then configure the 6520 with your aliant UN and PW info. you will know it has connected when the ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions