Questions & Answers for: NetGear show ip Office Equipment & Supplies

Question about DG834G Router

1 Answer

...show up could this be the problem? if so how do i fix it. first make sure all pcs are on the same network name, usually either mshome or workgroup, to check this go to my computer>right ...

Ad

Question about WGR614 Wireless Router

1 Answer

...a new custom service, and put in 8590 and the IP address of the server. Once you apply it, it will show up in the table and you'll see what port, a name, and the internal IP address 8590 goes to. ...

Ad

Question about WGT624 Wireless Router

2 Answers

new mini computer says"acquiring network address" shows contected to netgear but won't access the internet It means your router dhcp is not running proeprly. You can set ip addreses manually. for that

Question about WGR614 Wireless Router

1 Answer

i keep getting this ip address showing on my computer network box ip 192.168.1.3 how do i get rid of it? It's most likely the IP address of your computer (as determined by the DHCP server in the ...

Iwgr614 hooked up correctly, but not showing as connected I have it hooked up correctly, but it keeps showing not connected soo seems like it isn't going into the computer from the router. any ieas? ...

Can't accress the internet as there is no gateway showing My router is connected to the internet and my PC is connected to the router via a cable. The local area connection says there is traffic ...

Question about WNR2000 Wireless Router

2 Answers

...IP address) Bcast:192.168.1.255 Mask:255.255.255.0 3) netstat -nr This should show a default route $ netstat -nr 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 ...

Question about WG602 802.11g/b Wireless Access Point

1 Answer

...ip address. I show excellend signal strength, but "little or no connectivity" Hi, Your computer is most like have IP address permanently asign. To change the setting for windows 7, click ...

...it.Go to control panel/network connections,right click on the NIC or Wi-Fi connection being used,click properties,highlight Internet Protocol TCP/IP,click properties.This will show auto or static

Question about MR814 Wireless Router

1 Answer

...inbetween i.e. connect ADSL modem to the Router internet port then when i check the status it shows as connected to server but it does not get IP address nor the Gateway Ip or DNS... try power ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...