HP JetDirect IP Address HP LaserJet 2550n configuration page showing up IP address 0.0.0.0. default gateway is also shows 0.0.0.0 How can I assign a static ip address for embedded print server. Thank ...
Question about LaserJet 3055 All-In-One Printer
...IP address = Configuring Show to HP engineer, they told that main board is required to be replaced and the cost they told was almost 40% of the new HP 3055. Now the same problem observed with the ...
Question about LaserJet 3055 All-In-One Printer
...IP address = Configuring Show to HP engineer, they told that main board is required to be replaced and the cost they told was almost 40% of the new HP 3055. Now the same problem observed with the ...
Question about Officejet Pro L7780 All-In-One InkJet Printer
...IP address = Configuring Show to HP engineer, they told that main board is required to be replaced and the cost they told was almost 40% of the new HP 3055. Now the same problem observed with the ...
show how to set the ip address. I'm lost. I'm ip illterate as well as pc dumb. Any and all help is greatly appreciated. thanks, garmp Scroll through the menus until you get to the I/O section. I don't
Question about LaserJet 4000 Printer
show. press select. Press item until config tcp/ip NO shows, press value Yes press select. This should get you into the tcp/ip menu. use item, value and select keys to navigate to the setting you want
...show the IP address of the Jetdirect box. If this is an IP address in the normal range of your network, ie the first three numbers of the Jetdirect box's IP address and your computer's IP ...
Question about Jetdirect 170x Print Server
...and there is no IPv6 Address. The second printer I tried to set up I did the same thing, but IPV6 shows an address and I can't get it to print. Tried a 3rd and it also shows IPv6 address. IPv6 ...
...IP Address, but when I go Back In, it's completely wiped out and shows 0.0.0.0. Please Help!! if no network cable is connected then it will always show as 0.0.0.0 this is because the network ...
Question about LaserJet 4250n Printer
...ip address 0.0.0.0 why my printer only show ip address 0.0.0.0 This is most likely because it lost the IP address or it was not entered in the machine & saved so it goes back to default of ...
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions