Question about ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B)
...find modem when I manually installed IP (10.0.0.xx, 192.168.1.xx and 192.168.0.xx) nmap -v -sP showed that only one host is alive - my PC. How can I get connected to the device? What is the ...
IP address My wireless pci adapter a DWL-G510 will not find connection . With ipconfig it shows a dummy ip of 169.254........, this is what dhcp puts in when it cannot locate my ip of the hub . I even
...onto the search column. This I had to look for so after pressing start, run, CMD ...my IP address showed 192.168.0.187. I then opened up a new explorer page, put that IP address in the address bar, ...
Question about AirPlus G Wireless Range Extender DWL-G710 (dwlg710) Repeater
...anything on the network. Here is what I see when I connect to the router: -- the router log file shows a proper lease of the designated IP address to the G710 -- the router?s status tab shows the ...
Question about RangeBooster G WBR-2310 Wireless Router (WBR2310)
...gets a 168 private ip computer gets a 169.254 private automatic ip address. connection to router shows limited or no connectivity router network settings shows that the mac address for the
Question about DIR-625 (790069292637) Wireless Router
IP address will show along with your subnet mask and your gateway. If your machine is vista then it will show more junk. Your IP address should look like 192.168.1.1-254 for instance my computer shows
Question about DIR-625 (790069292637) Wireless Router
all light in routers are on and in system its showing net connected but not able to bowse, showing not connected to net. what can be the problem? Switch on the router for 30 seconds and check if you ...
Question about DP 303 (DP-303) Print Server
...show as long as they have theit IP address. Once their static IP is established the rest shall follow with what ever IP addresses are left. A dynamic IP setup grabs the available ip address and can ...
Question about DNS-321 Network Attached Storage Enclosure (DNS321wWD5000AAKS) Network Storage Server
...IP address but like I said I cannot seem to get the device to show up on my belkin router. You can try a couple of things, easy thing is to reset the NAS server by unplugging it and allowing it ...
Click on IP icon and it will prompt you for the password, Enter the password (default= admin) if you haven't set your own and it will show you the IP Regards, Bilal Kindly Vote for this solution too :
Usually answered in minutes!
1,082 Questions
984 Questions
709 Questions
641 Questions
532 Questions