Questions & Answers for: Intermatic show

How do I reset my Intermatic wall switch timer? If CR2 battery went dead or if battery removed more than 1 minute, then time-date disappeared, but programming stays in timer indefinitely even if power

...battery and have tried resetting it as well. Any ideal what the issue is? If the display will not show after replacing battery, try resetting and then reprogramming timer. If the display will not ...

the trick is to keep pushing the +/- button until it finally gets to astro, and the sun-moon symbol shows on display. When the sun-moon symbol shows, the display also shows AM. Press the +/- again and

...time: Hold down clock button while doing next steps Press Hour button until correct Hour am-pm shows (10:00am for example) Press MIN button until correct minute shows. >>> Now wait, the ...

On my intermatic HB88RC,I replaced the battery because it was dead and now it shows 44:44 on the display can this be reset? ...

...The wall timer to my outside lights says "noop" noop means no operation. This usually shows on older timer. You posted under Intermatic ST01C. Other have written to fixya with same ...

...the clock: Press and hold CLOCK button Keep holding CLOCK button and press DAY button until display shows current day (MO TU WE TH FR SA SU) Press Hour button until current hour with am pm displays ...

...T KNOW HOW TO PROGRAM THE TIMER I'VE LOST THE MANUAL. I NEED TO SET IT MON- SUN FROM 7PM TO 12PM IT SHOWS: 1 ON THIS IS WHERE I HIT HOUR & PUT 7:00PM THEN I HIT PROGRAM IT SAYS 1 OFF I HIT HOUR ...

...HB88RC programming Instructions: Install AA battery in timer so display will show, and you can program Set clock: Hold down clock button. Press day button until current day ...

Show a video of setting up everything From start to finish installing an settings, show a video please! Which timer do you have? What voltage are you using? What are you controlling? Copy following ...