Questions & Answers for: shortening washing machine hose

Kenmore front load washer drain problem My washer seems to have a clogged drain hose. It seems awfully long-would I be shooting myself in the foot if I cut the hose to make it only as long as ...

...that the stand alone pump is too cheap and too weak to get all of the water and suds out of the machine. We tried shortening the drain hose. That didn't work. Has anyone found a solution

how to replace the drain hose on amana washer model LWA50AW . When the washer drains the water overflows from the stand pipe. The drain hose at some point has been shortened and I'm thinking it needs ...

...drain hose of my zanussi 1045 washing machine it can be shortened without any problem. Just cut it to the req'd length, but do not make it too short, as it needs to be a certain heght above floor ...

wfw9500tw01 model suds and then f-35 wfw9500tw01 model suds and then f-35 I tried shorten the drai hose. Is there a clean out I need to check Hi, Just tilt the washer back and prop it up with some ...

want to know the proper length of the drain hose from washer to drain. I can shorten it to about 6" if need be want to know the proper length of the drain hose from washer to drain. I can shorten it ...

Whirlpool Duet washer does not indicate end of cycle and unlock door The girlfriend has a whirlpool duet clothes washer that does not indicate the wash/rinse/drain cycle has ended and does not unlock ...

machine has hot and cold feed i have only got a cold feed from the water supply I suggest you check with your local white appliance engineer but I don't think you will have any difficulty sourcing the

program. Any ideas? Maybe the water is not getting into the machine as quickly as it used to. You may have a filter on the hose connection. Does the water appear to be filling as fast as it did before