Questions & Answers for: shock rust

...shock with a pair of "vise grips" or a small pipe wrench. use a small wire brush to get the rust off the threads.be carefull not to do this with the new one. the groves on the shaft will ruin the new ...

upper right side shock mount broken If the surrounding steel is not rusted away than it can be welded back in place. If rusted or the mounting points are bad you may have to cut one out of a junk ...

...rust repair shock tower, front bow 1992 mustang rust repair shock tower, front frame area k member bolts to? u will need to cut one out of a wreck and have a new section welded in.have a stang and ...

...You'll need to remove the 2 bolts that go thru the top of the shock and body. Then unbolt the lower shock thru bolt and remove. You might want to use some WD-40 to help loosen the rust on the

...the rear shock absorber is pushing through the rust You need to talk to a body shop or a good welder. Your best bet is to shop around, theres no guess-timate without actually seeing what's

Easiest way to change shocks on a 99 blazer All i canhonstly tell you is they come out . But its not easy and you need tools .They tend to get rusted rusted on the bolts . I just did mine and need ...

taking the front shocks off One big bolt on bottom in lower control arm One nut on top of rod If you have no shock socket for the top or it is rusted on -- cut the nut thru with an air cut off tool or

how do I chnage the front and rear shocks in a 2001 4.0 How do I cange the shocks in a 2001 aurora 4.0? How hard is it to change the shocks. No rust mounts appear to be good. The shocks in the rear ...

...OUT ? LEAF SPRINGS U-BOLTS BAD.. FROM THE REAR FUEL TANK, BACK VERY RUSTY DRIVERS UPPER REAR SHOCK MT. RUSTED OUT? PAPER THIN ! MOUNTING U-BOLTS BOTH SIDES ARE URSTED OUT. SPARE TIRER

brick wall crack my 240 4 dr sedan isreally low in the rear and what else besides shocks can I do- could I use spacers in the springs ---also is there a special shock that would be the best for my ...